701A-F4 Package 574173
With a 15" Cutting Depth

701A-F4 Saw Package Includes:
(1) Power Head
(1) 15" guide bar
(1) 15" ProFORCE Chains
15" Saw Package only:
$5,819.95
701A-F4 Safety Notifications
READ THE Safety NOTICES from the ICS 701A Operation Manual,
before operating this equipment.
It is each end user's responsibility to utilize the Manufacturer's published information
for current changes.
701A-F4 Pneumatic Powered Concrete Cutting Chainsaw from ICS
Available with 10 inch, 15 inch, and 20 inch cutting depth options.
701A-F4 & 701A-PG Models Use 0.444" Pitch bars & chains,
All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi
Available with 10 inch, 15 inch, and 20 inch cutting depth options.
701A-F4 & 701A-PG Models Use 0.444" Pitch bars & chains,
All ICS Saws are Wet Cutting Systems - minimum 2gpm @ 20psi
Quick links to 701A specific products
701A

0.444" Pitch
Pro Cutter - ConcreteUtility Workers - Ductile
Power Head - Only
ONLY:
$4,809.95
701A-PG

0.444" Pitch
Utility Saw for
Ductile Iron Cutting
Same Power Head
as 701A-F4
Utility Saw for
Ductile Iron Cutting
Same Power Head
as 701A-F4
Bars

0.444" Pitch
Guide Bars for
Concrete Chains
10", 15", or 20"
Cutting Depth
Guide Bars for
Concrete Chains
10", 15", or 20"
Cutting Depth

CESSCO Combo Packs
Buy 2 ICS Chains &
Get a guide bar FREE!
Buy 2 ICS Chains &
Get a guide bar FREE!
701A

FORCE3 Chains
3/8" Pitch Used by general contractors
for cutting concrete
Not Available
701A-PG

PowerGrit Chains
0.444" PitchUsed by Utility Workers
for cutting Ductile Iron Pipe
Technical Specifications of the 701A-F4
701A-F4 PRODUCT SPECIFICATIONS | |
WEIGHT | 29 lbs without bar and chain |
BAR LENGTH | Up to 20 in |
Operating SPEED | 5700 rpm |
HORSEPOWER | 6.5 hp |
ENGINE TYPE | Pneumatic |
AIR SUPPLY | 90 psi 124 cfm |
POWERHEAD DIMENSIONS | 20 inches (45 cm) Length 10.5 inches (29 cm) Height 12 inches (25 cm) Width |
WATER SUPPLY | Minimum 20 psi, 2gpm |
